ASD660B Series

ASD660B Series

  • Time (0.0004 seconds) response frequency 2.5KHz (0.0004 seconds) using TI DSP chip, optimized speed loop, current loop control algorithm to improve the corresponding control frequency of the servo, shorten the response and positioning time. Overload (3 times) servo driver 3 times overload capacity, motor 3 times torque


  • products_banner
  • Overview

    RESPONSE FREQUENCY 1KHz

    Using TI DSP chip, optimized speed loop and current loop control algorithm to improve the corresponding control frequency of the servo, shorten the response and positioning time.

     

    OVERLOAD (3 TIMES)

    Servo driver 3 times overload capability, motor 3 times torque overload.

     

    FILTERING(MULTI-STAGE)

    The use of multi-stage filters improves vibration suppression, shortens the rectification time, and increases the corresponding speed, in addition to reducing front-end vibration when the drive stops, while effectively suppressing the effects of external disturbances.

     

    RESOLUTION(MULTIPLE ENCODERS)

    A variety of encoders such as 2500 lines, 17-bit incremental, 17-bit absolute, 20-bit incremental, 20-bit absolute, 23-bit incremental, 23-bit absolute, 24-bit incremental, 24-bit absolute, and magnetic encoders are supported and can be selected according to different needs of users.

     

    SUPPRESSION of RESONANCE

    For the phenomenon of positioning vibration caused by the elastic link between the load and the motor in the servo drive system, the trap parameters are reasonably allocated according to the system information to eliminate the vibration component in the position setting, thus effectively suppressing the position vibration.

     

    INTERNAL CONTROL

    ASD620B provides automatic zero return, internal easy PLC programming function, internal multi-speed, and multi-position.

     

    COMMUNICATION FORMATS

    Modbus, EtherCAT, MECHATROLINK-II, MECHATROLINK-III, CANopen, analog voltage, pulse sequence command type.

    Regeneration processing function, friction torque compensation, automatic gain adjustment, gain switching function, zero clamp function, password setting, power supply high sub-filter countermeasure, 5-digit display LED, built-in operation keyboard, based on high-speed DSP and FPGA processor, origin return, electronic gear ratio online dynamic switching and other functions to meet the needs of different industry applications, online real-time monitoring of load inertia, low-frequency vibration suppression multi-function The function of low rigidity and high gain setting.


  • Parameter

topPointer
bottomPointer